Showing you results for: “eldt”
To comply with the ELDT regulations, drivers seeking a Class A or Class B commercial driver's license (CDL), a passenger (P) endorsement, or a school bus (S) endorsement must successfully complete applicable entry-level driver training (theory and behind-the-wheel (BTW) instruction) from a training provider listed on FMCSA’s Training Provider Registry (TPR) before taking the State-administered skills test(s). A driver seeking the hazardous materials (H) endorsement must successfully complete entry-level driver training (theory only) prior to taking the State-administered knowledge test. The State must not administer the test(s) until verifying that the applicant has completed the required entry-level driver training. The ELDT regulations also impose minimum qualification standards for training providers and instructors conducting entry-level driver training.
As discussed in the preamble to the final rule establishing ELDT requirements (81 FR 88732 (Dec. 5, 2016)), FMCSA’s ELDT regulations establish minimum training standards for entry-level drivers. The CDL regulations do not directly preempt State law. Accordingly, the Federal ELDT requirements generally do not replace or otherwise supersede State-based ELDT requirements that exceed the minimum Federal standards for entry-level drivers. A State may also impose more stringent qualification requirements for training providers and training instructors conducting entry-level driver training in that State. FMCSA noted in the preamble to the 2016 final rule that questions would likely arise concerning the relationship between Federal and State ELDT requirements and the Agency would provide post-rule guidance as necessary. Answers to frequently asked questions are set forth below.
Can a CDL applicant domiciled in State A receive entry-level driver training (BTW range and public road) and pass the skills test in State B?
Yes. In accordance with 49 CFR 383.79(a), if a driver domiciled in State A obtains training in State B and passes the skills test administered by State B, State A must accept the skills test results from State B in fulfillment of the driver’s skills testing requirement and of State A’s skills testing administration requirement.
An applicant for a Class B CDL with school bus (S) and passenger (P) endorsements, domiciled in State A, obtains entry-level driver training (BTW range and public road) for Class B and S and P endorsements and passes the skills test in State B. Can State A require the applicant to meet additional standards to obtain the S endorsement?.
Yes. For example, some States require drivers seeking the S endorsement to obtain a State-issued certification related to the operation of school buses, which may include, for example, requirements for completion of a CPR or first aid course, a minimum number of BTW training hours in a school bus, a minimum number of classroom training hours, or specified training topics that exceed the ELDT curricula requirements.
Even if the driver obtained skills training in another State (the training State) and passed the S endorsement skills test in that State, nothing in the ELDT regulations prohibits the State of domicile from requiring the driver to obtain a State-based certification for school bus drivers as a condition of receiving a CDL with the S endorsement, or meeting other requirements as a condition of receiving a CDL. In accordance with § 383.79(a), the State of domicile cannot require the driver to re-take skills tests successfully completed in the training State.
An applicant, domiciled in State A, completes BTW training and passes the skills test in State B. State A accepts the skills test results from State B, but has a State law requiring applicants to complete a minimum number of BTW training hours in order to obtain a CDL (the ELDT regulations do not impose a required minimum number of BTW hours). Can State A impose additional BTW requirements as a condition of receiving a CDL in that State?.
Yes. The State of domicile may require the applicant to meet State-based requirements, such as a minimum number of BTW training hours, prior to receiving a CDL or a P, S, or H endorsement, even if the applicant obtained ELDT in another State and passed the skills test in that State. In accordance with § 383.79(a), the State of domicile cannot require the driver to re-take skills tests successfully completed in the training State.
The ELDT regulations require BTW instructors to meet certain qualification requirements, such as having at least 2 years of experience driving a CMV for which ELDT is to be provided or 2 years of experience as a BTW training instructor. Can a State require ELDT instructors to have more than 2 years of relevant experience or more than 2 years of training experience?
Yes. The ELDT qualification requirements for instructors are minimum standards. As set forth in the definitions of “theory instructor” and “behind-the-wheel (BTW) instructor” in § 380.605, instructors must comply with State-based instructor qualification requirements. A State may therefore impose more stringent qualification requirements on instructors who provide ELDT in that State, except for online theory instructors; this exception is set forth in the definition of “theory instructor” in § 380.605.
The ELDT regulations require training providers to follow a curriculum meeting the applicable criteria set forth in 49 CFR part 380, Appendices A-E. Can a State require a training provider to offer additional training topics or impose other additional requirements on the provider?.
Yes. As provided in § 380.703(a)(5)(i), training providers must comply with additional requirements imposed by a State in which the provider offers entry-level driver training.
Last Updated : September 27, 2022
No. FMCSA does not intend to provide written or electronic training materials for any of the curricula set forth in the regulations, nor will the Agency endorse specific materials or vendors. The ELDT curricula establish the minimum requirements for the content of each theory or BTW component. The Agency anticipates, however, that there will be variations in how the ELDT curricula are presented, depending on how a training provider prefers to present the material. In addition, training providers are permitted to add any additional curriculum elements they deem appropriate.
Last Updated : May 20, 2020
Yes. If the applicant obtains a CDL before the CLP or renewed CLP expires, the applicant is not subject to the ELDT requirements.
Last Updated : September 27, 2022
The regulations do not impose a penalty on the driver if the training provider fails to comply with the two-day reporting requirement. However, the driver may not take the applicable skills or knowledge test until the training provider has submitted the driver’s certification information to the Training Provider Registry, and the information is accessed by the licensing State.
The purpose of the two-day reporting requirement is to ensure the driver’s certification information is available to the State Driver Licensing Agencies (SDLAs) promptly, so that drivers do not experience a delay in taking their skills or knowledge test once they have ELDT. Training providers who routinely fail to comply with the requirement, may be subject to removal from the Training Provider Registry, in accordance with § 380.721(a)(1).
Last Updated : February 07, 2022
Training providers listed on the Training Provider Registry are the only entities that can provide training required by the entry-level driver training (ELDT regulations). To comply with the ELDT regulations, drivers must select a training provider from those listed in the Training Provider Registry.
Last Updated : February 07, 2022
Yes. As of February 7, 2022, applicants must complete the training required in 49 CFR part 380, prior to obtaining any of the following commercial license credentials for the first time: a Class A or Class B commercial driver’s license (CDL); an upgrade to a Class B or a Class A CDL; or a hazardous materials (H), passenger (P), or school bus (S) endorsement for the first time. Driver applicants must obtain training from a training provider listed on the Training Provider Registry.
Last Updated : September 27, 2022
The ELDT requirements are aligned with the existing commercial driver’s license (CDL) regulations in 49 CFR § 383.3.
The ELDT regulations do not create any new exceptions; therefore, any individual who is currently excepted from taking a skills test in order to obtain a Class A or Class B CDL or a passenger (P) or school bus (S) endorsement, is not subject to ELDT requirements. This includes:
- Individuals applying under § 383.3(c), (d), or (h);
- Individuals applying for a restricted CDL under § 383.3(e) through (g);
- Military personnel who meet all requirements and conditions of § 383.77; or
- Individuals applying for a removal of a restriction in accordance with § 383.135(b)(7).
Last Updated : September 12, 2022
No. The ELDT regulations do not require entry-level driver training to occur in a CMV equipped with a manual transmission. The regulations state that drivers need to train on manual transmissions only “if appropriate,” i.e., when the driver-trainee expects to operate a manual transmission CMV after obtaining a commercial driver's license (CDL) and is being trained in a vehicle equipped with a manual transmission.
Last Updated : January 07, 2022
The following requirements are established in 49 CFR 380.605.
Theory instructors must:
- Hold a CDL of the same (or higher) class, and with all endorsements necessary, to operate the commercial motor vehicle (CMV) for which training is to be provided.
- Meet all applicable State qualification requirements for CMV instructors. (Exception: This is not required if providing theory instruction exclusively.)
- Meet one of these:
- Have a minimum of two years’ experience operating a CMV requiring a CDL of the same (or higher) class, or the same endorsement; or
- Have previously held a CDL of the same (or higher) class; or
- Have a minimum of two years’ experience as a BTW CMV instructor.
Behind-the-Wheel (BTW) instructors must:
- Hold a CDL of the same (or higher) class, and with all endorsements necessary, to operate the CMV for which training is to be provided.
- Meet all applicable State qualification requirements for CMV instructors.
- Meet one of these:
- Have a minimum of two years’ experience operating a CMV requiring a CDL of the same (or higher) class, or the same endorsement; or
- Have a minimum of two years’ experience as a BTW CMV instructor.
Last Updated : February 07, 2022
The regulations fulfill a statutory requirement imposed on FMCSA by Congress under Section 32304 of the “Moving Ahead for Progress in the 21st Century Act” (MAP-21). The ELDT regulations are intended to enhance the safety of commercial motor vehicle (CMV) operations on our Nation’s highways by establishing more uniform requirements for both behind-the-wheel (BTW) and theory training, thereby resulting in more qualified CMV drivers.
Last Updated : May 20, 2020
The Federal Motor Carrier Safety Administration (FMCSA) provides the relevant driver-specific ELDT certification information to the SDLAs. This information includes the training provider’s unique ID number (assigned upon initial listing on the Training Provider Registry), the date the applicant completed applicable training, and the type of training the applicant received.
Last Updated : February 07, 2022
No. “Live” instructors used by registered training providers may use video training aids as part of the classroom instruction without verifying that the developer or instructor of the video training tool is qualified within the meaning of 49 CFR 380.605.
On the other hand, if the entire theory curriculum is presented via online training, online providers must ensure that the training content is delivered and/or prepared by theory instructors meeting the definition of “theory instructor” set forth in 49 CFR 380.605, as discussed in the ELDT final rule [81 FR 88732, 88779, Dec. 8, 2016].
Last Updated : June 08, 2021
No. The entry-level driver training (ELDT) regulations do not permit BTW training to be conducted by using a driving simulation device, and a driver-trainee may not use a simulation device to demonstrate proficiency for any of the BTW curricula. However, simulators may be used in theory training.
Last Updated : May 20, 2020
Yes. The regulations generally do not replace or otherwise supersede State ELDT requirements that exceed these minimum Federal standards when an entry-level driver obtains training in that State. Whether additional State ELDT-related requirements apply to the applicant is determined by where they obtain their behind-the-wheel (BTW) and/or theory training for the Class A or Class B commercial driver’s license (CDL) and/or the passenger (P), school bus (S), or hazardous materials (H) endorsements.
For example, if a State requires that entry-level drivers complete a CDL training program with a prescribed minimum number of BTW hours, a driver-trainee who obtains BTW training in that State must comply with that requirement. Similarly, driver-trainees are required to comply with any additional State-based requirements applicable to theory training in the State where they obtain their training. The regulations do not prohibit driver-trainees from obtaining training outside their State of domicile if they so choose.
Last Updated : September 27, 2022
To be eligible to take the Class A or Class B CDL skills test, the S or P skills test, or the H knowledge test, commercial driver’s license (CDL) applicants must have completed applicable entry-level driver training from a registered training provider. The type of training required depends on the type of license or endorsement for which the driver is applying. Below is a summary:
| License/Endorsement | ELDT Verification Occurs Before: | Is Theory Training Required? | Is Behind-the-Wheel Training Required? |
|---|---|---|---|
| Class A CDL (new or upgrade) | CDL skills test | Yes | Yes – Range and Public Road |
| Class B CDL | CDL skills test | Yes | Yes – Range and Public Road |
| Passenger (P) endorsement | P skills test | Yes | Yes – Range or Public Road |
| School bus (S) endorsement | S skills test | Yes | Yes – Range or Public Road |
| Hazardous materials (H) endorsement | H knowledge test | Yes | No |
Last Updated : September 27, 2022
No. The entry-level driver training (ELDT) regulations do not require that training providers be accredited by a third-party organization as a condition of eligibility for listing on the Training Provider Registry.
Last Updated : May 20, 2020
SDLAs must verify that an entry-level driver has completed the required training before allowing the driver to proceed with testing. The point at which the SDLA must verify completion of entry-level driver training depends on the type of license or endorsement the applicant is seeking. See the table below for a summary of these requirements.
| Type of license or endorsement | SDLA must verify completion prior to allowing |
|---|---|
| Class A or Class B commercial driver’s license (CDL) Passenger (P) endorsement School bus (S) endorsement |
Skills test |
| Hazardous materials (H) endorsement | Knowledge test |
Last Updated : September 27, 2022
Yes. If an individual successfully completes the entry-level driver training required for the Class A CDL, they are eligible to take the skills test for the Class B CDL, as well as the Class A CDL.
Last Updated : January 11, 2022
No. Per § 380.603(b), if the driver was issued a CDL before February 7, 2022, the driver is not subject to the ELDT requirements if the driver chooses to re-obtain a CDL of the same class, even if the previously-issued CDL is not currently valid.
Last Updated : February 07, 2022
The ELDT regulations establish minimum training requirements for entry-level commercial motor vehicle (CMV) operators in interstate and intrastate commerce who are applying for:
- A Class A or Class B commercial driver’s license (CDL) for the first time;
- An upgrade of their CDL (e.g., a Class B CDL holder seeking a Class A CDL); or
- A hazardous materials (H), passenger (P), or school bus (S) endorsement for the first time.
The requirements do not apply to individuals holding a valid CDL or an H, P, or S endorsement issued prior to February 7, 2022. Individuals who obtained a commercial learner’s permit (CLP) before February 7, 2022 are not subject to ELDT requirements as long as they obtain a CDL before the expiration date of the CLP or renewed CLP.
Last Updated : September 27, 2022
No. The entry-level driver training (ELDT) regulations do not require a minimum number of hours for the completion of BTW training (e.g., Class A, Class B and the passenger (P) and school bus (S) endorsements). The proficient completion of the BTW portions of the various curricula is based solely on the training instructor’s assessment of each driver trainee’s individual performance of the required elements of BTW training on the range and public road. All BTW training must be conducted in a representative vehicle for the commercial driver’s license (CDL) class or endorsement being sought.
Last Updated : May 20, 2020
The contents of these frequently asked questions do not have the force and effect of law and are not meant to bind the public in any way. The documents are intended only to provide clarity to the public regarding existing requirements under the law or agency policies.
An official website of the United States government